Configure SBC

If the Configure M365 Default Routing option was not selected, then the following screens are displayed:

1.

Configure SBC parameters according to the table below and then click Next.

SBC Parameters

SBC Parameter	Description
Configure SBC	Select check box if you wish to configure the SBC.
SBC Site Name	Name of the SBC site location.
Online PSTN Gateway	Unique subdomain name per M365 Tenant (CSOnlinePSTNGateway –FQDN) which represents the desired host name added for the carrier trunk. This name must be preconfigured on the M365 Tenant Domain or via DNS provisioning (see Register End Customer Tenant DNS Sub domains). If Default Routing is configured, then this field is automatically filled.
SBC Configuration	Select one of the following SBC configuration modes: ■ SIP Trunk: SIP Trunk used by Service Provider. When this option is selected, you must select both the SBC device (see 'Region' field below) and the Service Provider Carrier SIP Trunk (see 'Carrier' field below). ■ IP-PBX: Service Provider IP-PBX. When this option is selected, you must select both the SBC device and the Service Provider Carrier SIP Trunk (see 'Region' field below). ■ BYOC: (Bring-Your-Own-Carrier) for integrating customer SIP Trunk services that are different to the SIP Trunk service used by their Service Provider. When this option is selected, you must select both the SBC device (see 'Region' field below) and the Service Provider Carrier SIP Trunk (see 'Carrier' field below).
Region	Select the required SBC device for the site location.
Carrier: (this option is only relevant if you are connecting your Carrier to a SIP Trunk (when options SIP Trunk or BYOC are selected above). The selected carrier binds to the configured SIP Interface, Proxy Set and IP Profile on the SBC (where the same name is configured for all three entities on the SBC).
Carrier Registration	Select this option to perform SIP Account Registration for the Carrier trunk: ■ Username: Defines the digest MD5 Authentication username. The valid value is a string of up to 60 characters. By default, no value is defined. ■ Password: Defines the digest MD5 Authentication password. The valid value is a string of up to 50 characters. Note: The password cannot be configured with wide characters. ■ MainLine (Contact User): Defines the AOR username. This appears in REGISTER From/To headers as ContactUser@HostName ■ Host Name: Defines the Address of Record (AOR) host name. The host name appears in SIP REGISTER From/To headers as ContactUser@HostName.
Enable CAC	Enable Call Admission Control (CAC). From the drop-down list, select the desired CAC Profile call session number template.

2.

Click Next

 

3.

Configure SBC scripts:

●

Click the to edit the SBC Onboarding Script file. This is a Preconfigured script that is prepared by AudioCodes Professional services and that can be customized by setting Custom Variables.

●

Click the to edit the SBC Cleanup Script file. Each SBC Onboarding script file has a corresponding Cleanup script file to restore the configuration to their original settings. This is a Preconfigured script that is prepared by AudioCodes Professional services and that can be customized by setting Custom Variables.

●

Script variables can be customized and loaded to the SBC Onboarding and Cleanup scripts above.

See Customer Variables.

4.

When you have completed the configuration, click .

5.

Monitor the Customer and Deployment statuses (see Customer Status and Deploy Status and Status Indicators).